"Basic operationCover the holes at the bottom of the orifice and pour in the liquid to be measured. Make sure that the Flow Cup Meter is completely filled. Use the glass plate to scrape off any excess liquid from the edge of the flow cup. Uncover the holes at the bottom of the orifice. Negative pressure will keep the liquid in the cup until you're ready to begin measuring. Active a stopwatch (not included) while simultaneously removing the glass plate from the cup horizontally. As soon as the flow is interrupted for the first time, stop the watch and write down the time.Note: When using a Flow Cup Meter, it is very important to make sure that the instrument is cleaned thoroughly after each measurement, as residue in the orifice and cup can jeopardize the accuracy of future measurements. Scratches also can cause inaccurate results.***Test stand sold separately. See also for recommendations.***"

"The Saybolt Viscometer determines viscosity of petroleum liquids at temperatures from ambient to 464°F (240°C). PID control maintains ±0.05°F (±0.03°C) temperature uniformity throughout operating range and provides quick temperature stabilization with protection of an over-temperature control. Set-point temperatures are displayed in °F\/°C. Circulate tap water or refrigerated coolant through the built-in cooling coil for operation at near-ambient temperatures.","The enameled steel cabinet has specimen-area backlighting, leveling feet and sliding draft shields. Insulated stainless steel bath with 3gal (11.4L) capacity has overflow pipe and drain valve to simplify filling to required level. Flasks for the 60ml samples are easily centered on the removable, chemical-resistant alignment plate. The unit comes with four thermometer supports, four chained corks, withdrawal tube, tube nut and orifice wrenches, two port closures and four port covers, and oil strainer.","Order Regular Bath Oil separately for use up to 275°F (135°C), or Hi-Temperature Silicone Fluid with 620°F (327°C ) flash point. Overall Dimensions: 29x25x34in (737x635x864mm), WxDxH. Est. Ship Wt.: 58lb (27kg)."

油品油液粘度传感器

高精度瑞士进口液体粘度传感器，液体粘度在线监测，化工、医疗原辅料、油液粘密度在线过程监测，