EAW-Eastern Acoustic Works,Inc.,AX366的喇叭图案为60° x 60°。所有的AX外壳——包括配套的AX122超低音扬声器——都具有相同大小的双梯形形状。这允许创建水平或垂直…,AX366具有60° x 60°的喇叭图案。所有的AX外壳——包括配套的AX122超低音扬声器——都具有相同大小的双梯形形状。这允许在不同的波束宽度中创建水平或垂直定向的阵列——AXs优越的水平和垂直模式对称性保持了极性模式之间的适当关系。一套3/8-16螺纹安装点便于安装。单安培和双安培工作模式是用户可选择的。在单放大器模式下,无源交叉设计与数字信号处理器(DSP)一起工作。这降低了交叉的复杂性,并将功率损耗降至最低,并提供更复杂的数字处理,以最大限度地提高性能。AX系列采用了一种新设计的同轴换能器,具有高效率的MF锥和HF压缩驱动器。司机们共用一块普通的钕磁铁,使得音圈间距很近。这使得在轴上和轴外高度相干声音的MF和HF声源之间的距离最小化。MFs密封铝制机箱充当整个组件的散热器。MF/HF传感器通过EAWs专利径向相位插头2122的改进版本加载到大型公共喇叭中。独特的高频波导集成在相位插头的中心。它在声学上透明于MF能量,而在声学上不透明于HF能量并充当波导。低频率由一对间隔12英寸的锥形驱动器再现。由于低频子系统的声源是沿着MF/HF子系统的声轴,所以它保持了整体同轴设计。此外,低频驱动器间距提供更好的模式控制比类似大小的系统,使用一个单一的低频驱动器。配套的AX122超低音扬声器的设计是为了扩展斧头全范围扬声器的低频响应。在尺寸相同的外壳中,AX122阵列与斧头全音域扬声器完美结合。六年保修。
EAW - Eastern Acoustic Works, Inc.","The AX396 has a horn pattern of 90° x 60°. All AX enclosures -- including the companion AX122 subwoofer -- have an identically-sized dual trapezoidal shape. This permits creating horizontally or verti...","The AX396 has a horn pattern of 90° x 60°. All AX enclosures -- including the companion AX122 subwoofer -- have an identically-sized dual trapezoidal shape. This permits creating horizontally or vertically orientated arrays in a variety of beamwidths with the AXs superior horizontal and vertical pattern symmetry maintaining the proper relationship between the polar patterns. A set of 3\/8-16 threaded mounting points facilitate installation. Single-amp and bi-amp operating modes are user-selectable. In single-amp mode the passive crossover is designed to work with a digital signal processor (DSP). This reduces the crossover's complexity and minimizes power losses and provides more sophisticated digital processing to maximize performance. The AX Series features a newly-designed coaxial transducer with high-efficiency MF cone and HF compression drivers. The drivers share a common neodymium magnet allowing closely spaced voice coils. This minimizes the distance between the MF and HF acoustic origins for highly coherent sound both on and off axis. The MFs sealed aluminum chassis acts as a heat sink for the entire assembly. The MF\/HF transducer loads into a large common horn via a modified version of the EAWs patented Radial Phase Plug™. A unique HF waveguide is integrated within the center of the phase plug. It is acoustically transparaent to the MF energy while being acoustically opaque to and acting as a waveguide for the HF energy. The low frequencies are reproduced by a pair of spaced 12-inch cone drivers. This LF subsystem maintains the overall coaxial design as its acoustic origin is along the acoustic axis of the MF\/HF subsystem. In addition the LF driver spacing provides better pattern control than systems of similar size that use a single LF driver. The companion AX122 subwoofer is designed to extend the low frequency response of the AX full-range loudspeakers. With an identically-sized enclosure the AX122 arrays perfectly with the AX full-range loudspeakers. Six year warranty.
EAW-东方声学工程有限公司,紧凑型三向系统。喇叭加载MF/HF(65° x 45°色散模式)。12英寸。如果7英寸。MF/1.4英寸。退出高频。可切换电源:全范围无源或双安培(无源低频/中频)。用于便携式使用或永久性安装,,一个3路全频扬声器,位于梯形通风外壳内。包括一个12英寸低音炮和一个装有喇叭的7英寸中音锥(带径向相位插头)和一个1.4英寸出口压缩驱动器(位于65-u00b0 x 45-u00b0恒定方向性喇叭上)。内部交叉是用户可切换的被动或双安培操作与被动LF\/MF交叉。外壳提供多种安装点/悬挂点以及一个完整的杆安装杯。提手的位置是为了在携带时保持最佳平衡。
EAW-东方声学工程有限公司。。(2) 15英寸。左前通风(2)7英寸。MF密封。2英寸。在90° x 70°椭圆圆锥WGP上退出HF。集成飞行轨迹和悬挂点。可切换电源:全量程无源或双安培(无源MF/HF)。,一个3路全量程系统,位于通风梯形外壳内。包括(2)个15英寸低音扬声器(2)个7英寸中音锥和一个2英寸出口/3英寸音圈压缩驱动器,安装在椭圆形(90° x 70°)波导板上,可切换供电模式:无源或双放大(无源MF/HF交叉)。
EAW-东方声学工程有限公司-垂直格式3路全量程系统EAW专利径向相位插头技术钕磁铁高频压缩驱动器,带2.5英寸音圈喇叭,加载MF\/HF 60° x 45°色散模式(2)12英寸。低频倾斜加载阵列和更多。,双放大或三放大3路全范围系统在梯形外壳。包括(2)个12英寸低音喇叭、一个10英寸MF圆锥体喇叭和一个60 u00b0 x 45 u00b0恒定方向性喇叭上的1.4英寸出口2.5英寸音圈钕高频压缩驱动器。
EAW-Eastern Acoustic Works,Inc.—水平格式化外壳中的双放大或三放大三通全量程系统。,矩形外壳中的双放大(无源中高交叉)或三放大三通全量程系统。包括一个15英寸的低音扬声器(通风),一个带径向相位插头的10英寸中频圆锥体和一个1.4英寸出口\/2.5英寸音圈高频钕压缩驱动器,安装在60° x 45°恒定指向性喇叭上。
EAW-Eastern Acoustic Works,Inc.,水平格式化3向系统EAW专利径向相位插塞技术钕磁铁高频压缩驱动器,带2.5英寸音圈喇叭加载MF\/HF 90° x 45°色散模式15英寸低频;10英寸。MF;1.4英寸。退出高频可切换电源配置。,一个双放大或三放大三路全量程系统在一个水平格式化的外壳。在90° x 45°恒定指向性喇叭上包括(1)15英寸低音喇叭(1)加载10英寸中频圆锥体的喇叭和(1)1.4英寸出口\/2.5英寸音圈钕高频压缩驱动器。
EAW-东方声学工程有限公司,全量程3路系统15英寸。LF;10英寸。喇叭加载MF;2英寸。退出钕铪。90° x 40°波束宽度。水平配置,以创建垂直阵列。,在通风梯形外壳中的3路全量程系统。包括一个插槽加载15英寸低音炮和一个喇叭加载10英寸中频锥径向相位插头和一个2英寸出口\/3英寸音圈钕压缩驱动器。中频和高频喇叭提供90 x 40的标称波束宽度。在输入面板上有跳线的内部无源交叉允许用户选择双放大或三放大操作。在这两种情况下,都需要数字信号处理来达到规定的性能。外壳采用3/8-16英寸螺纹悬挂点的综合系统。
EAW-东方声学工程有限公司,全量程三通系统(2)15英寸。LF;(2)10英寸。喇叭加载MF;2英寸。退出钕铪。60° x 40°波束宽度。可切换的无源/双安培电源。水平配置,以创建垂直阵列。,在通风梯形外壳中的3路全量程系统。包括两个15英寸的插槽。低音喇叭和两个喇叭加载10英寸中频锥径向相位插头和2英寸出口3英寸隔膜钕压缩驱动器。MF和HF喇叭提供标称60° x 40°波束宽度。在输入面板上有跳线的内部无源交叉允许用户选择双放大或三放大操作。在这两种情况下,都需要数字信号处理来达到规定的性能。外壳采用3/8-16英寸螺纹悬挂点的综合系统。
EAW-东方声学工程有限公司,全方位三向系统。(2) 15英寸低频;(2)10英寸喇叭加载中频;2英寸出口钕高频。90° x 40°波束宽度。水平配置,以创建垂直阵列。,在通风梯形外壳中的3路全量程系统。包括两个插槽加载15英寸低音扬声器和两个喇叭加载10英寸中频锥径向相位插头和一个2英寸出口3英寸隔膜钕压缩驱动器。MF和HF喇叭提供标称90° x 40°波束宽度。在输入面板上有跳线的内部无源交叉允许用户选择双放大或三放大操作。在这两种情况下,都需要数字信号处理来达到规定的性能。外壳采用3/8-16英寸螺纹悬挂点的综合系统。
EAW-东方声学工程有限公司,全频VA4扬声器系统。仅适用于永久性安装。直接辐射15英寸。低音扬声器在最佳通风外壳。喇叭负载10英寸。锥形,带VA4相插头2-in。出口\/75mm音圈压缩驱动器恒定指向性。,一个通风梯形外壳中的3路全量程系统。包括一个插槽加载15英寸低音扬声器-一个喇叭加载10英寸中频锥形径向相位插头和一个2英寸出口\/3英寸音圈钕压缩驱动器。MF和HF喇叭的标称波束宽度为60 x 40。输入面板上带有跳线的内部无源交叉允许用户选择双放大或三放大操作。在任何一种情况下,都需要数字信号处理来达到规定的性能。外壳采用3\/8-16英寸螺纹悬挂点的综合系统。
EAW-Eastern Acoustic Works,Inc.-水平格式的3路全频系统EAW专利径向相位插头技术钕磁铁高频压缩驱动器,带2.5英寸音圈喇叭加载MF\/HF 60° x 45°色散模式(2)12英寸低频倾斜加载阵列;10英寸MF及更多。,在水平格式化的机箱中的一种双放大或三放大的3路全量程系统。包括(2)个12英寸低音喇叭、一个10英寸MF圆锥体喇叭和一个60 u00b0 x 45 u00b0恒定方向性喇叭上的1.4英寸出口2.5英寸音圈钕高频压缩驱动器。
EAW - Eastern Acoustic Works, Inc.","Triamplified VA4 3-way downfill system. 12-in. LF\/asymetrically horn-loaded 10-in. MF\/2-in. exit HF. Vertical coverage from 0° to -35°. P (install) or F (touring) versions available. Digital signal processor required to achieve specified performance.","The KF755F 3-way tri-amplified full range system is the downfill companion to the KF750F array module. Since the large mid frequency horn contains both the high and low frequency sub-systems -- the overall package is just 31-in. high. Still the KF755F provides consistent wideband pattern control in both the vertical and horizontal planes. The large MF horn loads a specially designed 10-inch midrange cone whose geometry exactly matches the rear of its phase plug assembly. By developing the driver and phase plug as a single-unit pathlength discontinuities within the MF passband have been eliminated without compromising the directional qualities of the source as all previous phase plug designs have. The 2-inch exit\/4-inch voice coil HF compression driver is mounted on an asymmetrical 35° x 35° constant directivity horn mounted coaxially within the MF horn flare.The KF755Fs 15°-per-side trapezoidal enclosure features eight 4-position fly tracks (four each front and rear) that accept industry-standard fly clips.