Alliance Sensors Group PGxR 线性电位计

Specifically Designed and Engineered for Applications Where Radiation is Present in Power Generating Steam Turbine Control Systems ","The Alliance Sensors Group PGxR Series linear sensors are the first LVDT-based valve position sensors designed and engineered specifically for applications in electric power generating steam turbine control systems where radiation is present. Materials selected for the Alliance Sensors Group PGxR Sensors allow the sensor to survive a dose of 30 Mrads for 40 years. The PGxR series comes in 2 versions- the PGHR heavy duty LVDT and the PGSR super duty LVDT. PGxR Series sensors are available in full ranges of 3 inches 6 inches, 9 inches, 12 inches, and 15 inches.","Features","Also Ideal For Other Heavy Duty Linear Position Sensing Applications","Alliance Sensors Group PG Series Linear Sensors solve an underlying problem common to most LVDTs found in power gen applications. The problem results from the fact that typical AC-LVDT sensors, currently used for valve position sensing on steam turbines, were never really designed for that type of physically demanding use. The LVDTs mounted on a steam turbine get stepped on, have heavy things dropped on them, are subjected to jets of live steam, etc. Unlike the ordinary LVDTs now in service, the PG series can take this kind of abuse for years on end, providing a new level of reliability in such a rough application, and at comparable costs to typical LVDTs currently in use.","Starting with an aerospace quality LVDT, everything about the Alliance Sensors Group PG Series linear sensor is heavy duty, from the wire connection terminal block inside an IP-68 sealed housing to the 3\/8 inch diameter core rod on the outside, in which the LVDT’s core is encased so that it can never vibrate loose, break off, or fall away. An available in-line ball joint on the connecting rod takes up installation misalignment and a double contact shaft seal keeps dirt and grit out of the sensor’s bore. The wall thickness of the sensor’s housing is from ten and to twenty times as thick as that of typical AC-LVDTs. Electrical connections use Euro-style screw-clamp-type terminals for any size wire from No. 24 to No. 14 AWG, eliminating the nuisance of soldering to misfit connectors. Electrical cables pass through a 3\/4-NPS female hub that accepts liquid tight connectors, cord grips, or flexible conduit fittings. A 3\/4- to 1\/2-NPS female adapter is included.","There has never been anything like the Alliance Sensors Group PG Series LVDT Linear Sensors for power gen use. Designed and engineered to survive long term in the rough environment of the steam turbine deck, these PG sensors bring a new level of confidence and reliability to this application.

特性

• Rated for up to 350°F (175°C) operating temperature
• 内置超温指示器，保证覆盖范围
• 3/8 inch diameter core extension rod…twice the diameter of typical LVDTs
• 全封闭核心… 不能振动松动、断裂或脱落
• Double contact shaft seal keeps grit and dirt out of the LVDT’s bore
• 堆芯杆上的直列球头承担了轻微的安装偏差
• 外壳的厚度是标准lvdt传感器的10到20倍
• 适用于三线制、四线制、五线制和六线制，并配有比率（A-B）/（A+B）信号调节器，要求二次信号的总和恒定
• 温和抗辐射版本(30 mrads, 40年)可用
• Electrical connections via Euro-style screw clamp terminal block that takes no. 24 to no. 14 wire…no soldering required
• 3/4 nps内螺纹导管端口接受液密连接器、线夹或挠性导管配件。1/2 nps内螺纹导管适配器随装置提供。
• 可选安装法兰、球形杆眼端、压紧夹、定制加长杆和其他现成的安装硬件
• 2-Year warranty … twice as long as the industry standard
• 用于:截流阀，调速器，节流阀，旁通阀，截止阀
• Totally enclosed core… cannot vibrate loose, break off or fall away
• 双接触轴封保持砂砾和污垢的LVDT的孔
• 工作在3线，4线，5线和6线系统，并与比率(a-b)/(a+b)信号调节器要求一个常数的二次总和
• 可提供轻度抗辐射型（40年30 Mrads）
• 可选的安装法兰，球形杆眼端，压紧夹，自定义延长杆，和其他安装硬件随时可得到