"CET-AX Non-Contact Safety Switches are used to monitor the position of movable machine guarding by means of Inductive Coding. These systems are designed for use in areas where a high level of tamper resistance and safety is required. These systems feature an inductive read head, evaluation unit \/ safety module, and a digitally coded actuator. Unlike universally coded magnetic switches, the CES actuators are uniquely coded and cannot be bypassed by any means. The safety switch CET-AX with guard locking is based on the proven transponder principle. When used in conjunction with the CES evaluation unit, the system provides up to safety category 4. Note: CET-AX requires the use of an external evaluation unit."

特性

• Safety switch with guard locking and guard locking monitoring
• Available in mechanical and electrical locking
• Integrated transponder coding
• Sturdy die-cast housing for harsh environments
• Status LEDs
• High locking forces up to 5,000 N (1124 lb)
• Achieves the highest level of safety when used in conjunction with CES evaluation module.
• Highest protection against tampering
• Non-contact system
• Fault diagnostics
• Operates under extreme environmental conditions e.g. dirt, moisture, ambient temperature
• Overcomes misalignment issues
• Vibration resistant
• Minimizes down-time
• M12 connector
• Environmental Protection IP67 - oil and dust tight, and water resistant
• Ambient operating temperature -20 to 55C
• CES evaluation module required
• Die-cast aluminum housing
• Diagnostic LED's
• Reverse polarity protected, integrated bridge rectifier
• Up to safety category 4