"CTP Safety Switches are used to monitor the position of movable machine guarding by means of Inductive Coding. The safety switch CTP with guard locking is based on the proven transponder principle. The CTP is a narrow profile thermoplastic housing with integrated evaluation module making it a complete package. These switches feature an inductive read head with built-in evaluation and a digitally coded actuator."

特性

• Category 4 / PLe according to EN ISO 13849
• Integrated evaluation module
• Available in Unicode and Multicode versions
• Safety switch with guard locking and guard locking monitoring
• Narrow body housing
• Available in Mechanical locking and Electrical locking
• Status LED’s
• Integrated funnel
• 4 approach directions
• Wide selection of actuator types
• Achieves the highest level of safety
• Highest protection against tampering
• Fault exclusion not necessary
• Non-contact system
• Overcomes misalignment issues
• Vibration resistant
• Same footprint as TP and STP switches
• Fault diagnostics
• Narrow housing
• Manual bypass
• Minimizes down-time
• Perfect for extruded aluminum guarding
• Simple front bypass
• Optional security key bypass
• Reinforced thermoplastic housing
• Environmental protection IP 69K
• Ambient operating temperature -20 to 55C
• Operating voltage 24VDC +/- 15%
• Current consumption 400mA
• M23 or M12 connectors
• High locking forces up to 2,600 N (584 lb) max.
• Dual PNP safety outputs
• Solenoid
• Switching current 50mA
• Short circuit protected
• Mechanical locking or electrical locking
• 24VDC +10% /-15%
• Current consumption 40mA