"CES-I-AP Non-Contact Safety Switches are used to monitor the position of movable machine guarding by means of Inductive Coding. These systems feature an inductive read head with built-in evaluation and a digitally coded actuator. Unlike universally coded magnetic switches, the CES actuators are uniquely coded and cannot be bypassed by any means. The non-contact safety switch CES-I-C04 is suitable for systems on which a large number of safety doors need to be monitored. The small design of the actuator and read head (included integrated evaluation unit) allows easy mounting on the safety guard."

特性

• Combination read head and evaluation unit
• Very small design
• 3 active faces
• Monitoring output
• LED diagnostics
• Both AP and AR versions are available
• Achieves the highest level of safety
• Highest protection against tampering
• Non-contact system
• Fast diagnostics with LEDs
• Suitable for left or right hinged doors
• Long operational life
• Operates under extreme environmental conditions e.g. dirt, moisture, ambient temperature
• Short circuit detection by pulsed signals
• Overcomes misalignment issues
• Vibration resistant
• Up to safety Category 4/PLe
• M12 or M8 connector
• Environmental Protection IP67 / IP69K (M8)
• Ambient operating temperature -25 to +65C
• Operating voltage 24VDC +/- 15%
• Current consumption 35mA
• Dimensions 42mm x 25mm x 18mm
• Safety output 150mA max load
• Monitoring output 50mA max load