产品介绍
Barksdale's ML1H & L2H Series Temperature Switches provide unmatched performance, quality & reliability in a mechanical thermostat. The single set point ML1H and dual set point L2H, can switch, measure & control temperatures from -50° to 450°F (-45° to 232°C), while the optional adjustable differential provides precise control. These locally mounted switches provide fast response and accurate measurements at the temperature source. Both the ML1H & L2H Series are electrically rated for 10 amps @ 125\/250 VAC & 3 amps @ 480 VAC. Standard 3- & 6-pin terminal strips simplify installation. The ML1H & L2H Series are rated NEMA 4 & 13; the optional NEMA 4X construction protects the rugged die-cast aluminum enclosure from corrosive environments. Copper or stainless steel temperature sensors are available to handle a wide range of media. Optional thermowells allow the sensor to work in pressurized vessels to 5000 psi. UL listed & CSA approved, ML1H & L2H Series Temperature Switches are perfect for your temperature sensing needs.
特性
- 可靠、准确
- 局部感应
- nema 4和ip 65
- ul、csa和ce认证
- 单开关或双开关
- +/-1%重复性
- 当地的传感
- NEMA 4和IP 65
- 单或双开关
ML1H 工业压力传感器技术参数
| 规格项 | 参数值 | 勾选搜索替代 |
| 性 能 | ||
| 迟滞 / 差异 | 1 to 6 DegF (0.5556 to 3.33 DegC) | |
| 特 性 | ||
| 开关形式 | Normally Open, NO; Normally Closed, NC | |
| 掷数 | Double Throw, DT | |
| 极数 | Single Pole, SP | |
| 开关点 | Field Adjustable | |
| 高温设定点 | -50 to 450 F (-46 to 232 C) | |
| 特征 | Automatic Reset; Manual Reset (optional feature); Hermetically Sealed (optional feature) | |
| 电 气 | ||
| 最大交流电压 | 480 volts | |
| 最大电流 | 10 amps | |
| 物 理 | ||
| 最大直径或宽度 | 2.75 inch (69.85 mm) | |
| 最大高度或长度 | 4.5 inch (114 mm) | |
| 重量 | 24 oz (6.67 N) | |
| 安装 | Probe Configuration | |
| 更多规格 | ||
| 产品类别 | Thermal Switches and Thermal Protectors |
产品替代
工业压力传感器相关品牌
工业压力传感器同类产品
加载中···
