Restek 瑞斯泰克 Rt®-Alumina BOND/Na2SO4Columns 气相色谱柱

Restek Rt®-Alumina BOND columns are highly selective for C1–C5 hydrocarbons and separate all unsaturated hydrocarbon isomers above ambient temperatures. The reactivity of the aluminum oxide stationary phase is minimized to improve column response for polar unsaturates, such as dienes, and the columns’ sensitivity (or response) ensures linear and quantitative chromatographic analysis for these compounds. Strong bonding prevents particle generation and release to allow valve switching without harming the injection or detection systems. And because they are stable up to at least 200 °C, Rt®-Alumina BOND columns can be regenerated to restore full efficiency and selectivity if water is adsorbed by conditioning at their maximum temperature. High capacity and loadability give you exceptionally symmetric peaks, making these columns ideal for volatile hydrocarbon separations at percent levels, as well as impurity analyses at ppm concentrations. Restek Rt®-Alumina BOND PLOT columns are manufactured on fused silica tubing; select phases are also available on metal MXT® tubing. Guaranteed Reproducibility To ensure reproducible retention times and predictable flow behavior column-to-column, each Rt®-Alumina BOND column is extensively tested. A hydrocarbon test mix confirms proper phase retention and selectivity. To calculate k (capacity factor), which is a measure of phase retention, 1,3-butadiene is used, while selectivity is measured using retention indices for propadiene and methyl acetylene. The resolution of trans-2-butene and 1-butene is also verified, and to measure efficiency, plates per meter are checked using 1,3-butadiene.

特性

• 丁烷后洗脱乙炔/丙二烯。
• 丁烯异构体（丁烯流中杂质）的最佳分离。
• 甲基乙炔在1,3-丁二烯后被洗脱。
• 环丙烷（丙烯中的杂质）在丙烯之前洗脱。