LumaSense Technologies, Inc. 3731 气体仪器

特性

• 用于大封闭容积直接检漏的固定式独立多点监测
• 超灵敏，检测极限为6ppb
• 提供12或24个通道，采样线可延伸至75米。
• 具有高可靠性的自检程序
• 维护费用低，每年只需校准一次
• 用于检测趋势的模拟输出和12个可配置区域报警继电器
• 测量数据存储在内存中，可通过用户友好的软件轻松导出到远程PC
• 测量数据存储在内存中，与容易出口到远程pc通过用户友好的软件

The SF6 Leak Detection products from LumaSense offer an unmatched combination of performance and convenience. Based on the company’s Photoacoustic Spectroscopy (PAS) technology, they offer highly accurate, repeatable, and reliable quantitative gas analysis and detection. The growing environmental requirements and pressures regarding the use of SF6 make LumaSense’s leak monitors a coveted tool designed for routine testing or continuous monitoring at minimal costs.","New regulatory frames, like the F-Gas Directive (EC 517\/2014), are mandating the use of leak detection systems in the vast majority of high-voltage SF6-GIS installation in order to better mitigate the risk of SF6 emissions in particular when the existing gas instrumentation is not accurate enough to provide early detection: Pressure\/density switches used for safety considerations (to prevent catastrophic failure) lack of sensitivity, and manual leak checks only provide discrete check points. Instead, stationary leak detection systems enable a permanent monitoring and early warning in the case of a leakage event occurring.","Our 3731 system leverages 20-years of leadership on the ultra-sensitive photoacoustic sensing technique to provide a direct and integral leak detection solution capable of monitoring large switchgear rooms. The system verifies that the GIS Equipment operates below the industrial target of 0.5% yearly leakage rate or better.","The 3731 system can detect within a short response time any excessive increase in the leak rate, enabling to decrease the number – hence the cost – of periodic leak checks while providing early leak detection.