产品详细信息
MK 9151 - level relay
The MK9151 is used for
Level monitoring and control of conductive liquids and powders, e.g. maximum and minimum fill level, protection against overfilling and dry runningMonitoring and control of the mix ratio for conductive liquidsGeneral resistance monitoring, e.g. recording temperature limits with PTC (device to IEG 255, VDE 0435 section 303)
Features
3 electrode connections for 2-point and 1-point level controlThe metering circuit galvanically isolated from the mains is immune from high levels of interferenceMax. lead length to the electrodes: 1500 mWide setting range: 2 → 450 kΩ which enables differentiation between liquid and foamAdjustable response and fallback delay: 0.2 → 20 sProgrammable for working current principle (without bridge) or rest current principle (X1-X2 and/or X1-COM bridge)2 LEDs to indicate operating readiness and contact position1 changerOverall width 22.5 mm, protection class IP40
液位继电器用于监测导电液体的液位,且提供向上/向下、最小、最大和灌注/排空变型。
液位继电器可直接安装且使用安全。
应用实例
液位继电器(导电液位传感器)适用于各种应用,包括污水管理和腐蚀性液体介质的检测和控制,特别设计用于提供:
监控和控制液位防止泵空运转可检测系统中是否存在液体泄漏控制介质混合比例控制液位
MK9151.11 2-450kOhm DC24V 液位控制器技术参数
规格项 | 参数值 | 勾选搜索替代 |
更多规格 | ||
探头电压 | 10V 交流 | |
最低工作温度 | -20°C | |
安装样式 | DIN 导轨 | |
电源电压 | 24 V 直流 | |
总体深度 | 99mm | |
输入数目 | 1 | |
总体长度 | 82mm | |
总体宽度 | 22.5mm | |
最高工作温度 | +60°C |
产品替代
资料下载
文件名称 | 大小 | 操作 |
---|---|---|
A700000006909398.pdf | 335.31 KB | 下载 |