Ebetter 义嘉泰科技 STK3337-X 环境光传感器

STK3337-X

Ambient Light Sensor and Proximity Sensor with Built-in IR LED

1. OVERVIEW

Description

The STK3337-X is an integrated ambient and infrared light to digital converter with a built-in IR LED and I2C interface. This device provides not only ambient light sensing to allow robust backlight/display brightness control but also infrared sensing to allow proximity estimation featured with interrupt function. For ambient light sensing, the STK3337-X incorporates a photodiode, timing controller and ADC in a single chip. The excellent spectral response is designed to be close-to human eye. The STK3337-X is suitable for detecting a wide range of light intensity environment. For proximity sensing, the STK3337-X also incorporates a photodiode, timing controller and ADC in the same chip. The spectral response of STK3337-X is optimized for wavelength 940nm infrared light. The STK3337-X provides programmable current setting to drive IR LED and employs a noise cancellation scheme to highly reject unwanted ambient IR noise. The STK3337-X has excellent temperature compensation, robust on-chip refresh rate setting without external components. Software shutdown mode control is provided for power saving application. The STK3337-X operating voltage range is 1.7V to 3.0V.

Feature

Integrated ambient light sensor, proximity sensor and infrared LED in one package. 

Proximity Sensor

16 bits resolution for proximity detection

Built-in LED driver with flexible setting

– LED turn-on time : 7 steps IT

– LED current : 3.125 / 6.25/ 12.5 / 25 / 50 / 100 /150 mA

Flexible interrupt setting

– Several interrupt modes meet application requirements.

– Flag modes are included.

– Intelligent persistence to speed up the response time : 1/2/4/16 times 

Low noise design

High ambient light suppression

940nm LED for STK3337-X. 

Ambient Light Sensor

Convert ambient light intensity to 16-bit digital data format

3rd generation ambient light sensor which closes to human-eye response and suppress IR portion. 

Flexible digital settings

– Integration time : 7 steps IT 

Flexible interrupt setting

– Interrupt while out-of- window

– Persistence : 1/2/4/8 times 

Clear channel for different light source compensation.

General

Fully digital control with I2C interface

– 1.7 ~ 3.6V I2C interface

Low power design

– Standby mode

– Wait mode

VDD wide operation voltage : 1.7~3.0V

Excellent temperature compensation: -40 to 85°C 

Available package options: OLGA

– STK3337-X : 4 x 1.5 x 1 (mm)

Lead-free package (RoHS compliant)

Moisture Sensitivity Level 3

Applications

Mobile Phone, Smart-phone, PDA