Acromag TT330 Series – TT336 Current Millivolt Input Four-Wire Transmitter 温度信号调节器

特性

• Multi-range ±20mA or ±500mV input
• 通用的电流/电压输出
• 12-32V直流电源
• 使用windows配置软件，通过usb轻松设置和数字校准
• Single unit supports unipolar and bipolar input ranges up to ±20mA or ±500mV DC
• 兼容0-20a交流传感器输入
• 通用输出连接支持范围高达±21mA或±10.5V直流电，无需重新布线
• 节省17.5毫米(0.7英寸)的空间，可插拔接线端子，方便接线
• 高精度、线性、稳定性和可靠性
• 用户可选过滤（低、中、高）
• 响应时间可调（10ms至1200ms）
• 支持反向(反向)输出
• 总线电源，本地电源，或两者兼而有之
• 冗余电源就绪（轨道/本地）
• 1500v输入隔离，3路(电源、输入、输出)
• 抗冲击（50g）和振动（5g）
• 安装在t型din导轨上
• Wide ambient operation (-40 to 80°C)
• 符合ce标准。ul/cul 1级2区认证
• ATEX认证
• 高精度、线性、稳定、可靠

The TT336 model is a space-saving four-wire transmitter that isolates and converts a DC current or low voltage input to a proportional control signal. DC current and voltage output are both supported on a single model. An optional DIN rail bus can deliver primary or redundant power to multiple units without wiring.","High-voltage isolation separates the input from the output circuit. Isolation protects from surges, reduces noise, and eliminates ground loop errors.","Setup and calibration are fast and easy with a convenient USB connection to your PC and Acromag’s Windows configuration software.","Advanced signal processing capabilities, variable range input, and convenient USB programming make this instrument a very versatile temperature measurement device. These transmitters can withstand harsh industrial environments and operate reliably across a wide temperature range with very low drift. They feature RFI, EMI, ESD, EFT, and surge protection plus low radiated emissions.","Features