小程序
传感搜
传感圈

Electro-Sensors 伊莱克森 VS1 振动传感器

分享
  • 后询价或查看价格

  • VS1

  • 振动传感器

  • Electro-Sensors 伊莱克森

  • 请咨询供应商

  • Electro-Sensors 伊莱克森

联系销售
专家支持

Features • Settable trip-point in RMS vibration velocity units (in\/s) • Settable over\/under alarm function • 2 output options: SPDT relay and isolated transistor • Both output options are failsafe • Settable alarm delay suppresses nuisance alarms • At-a-glance power, vibration and output status • 24 VDC powered • 2 housing options: compact NEMA 4X and XP (explosion proof)","VS1 and VS2 monitor the machine surface to which they are attached and alarm when vibration either exceeds or falls below the trip-point setting, according to the alarm over\/under switch setting. Each have three LED indicators providing power, vibration and alarm status. The isolated transistor or relay output may be wired for machine shutdown or as part of an early warning system. The adjustable alarm delay prevents false alarms by allowing the user to set the minimum continuous fault condition time for alarm, thus preventing needless system shutdowns during operation or startup. Two rugged cast aluminum housing options are available for each model: the compact NEMA 4X and the Class I and II rated explosion proof (XP). A separate 24 VDC power supply is also available.","VS1 The VS1 is a low-level vibration switch optimized to monitor non-intentionally vibrating machinery for the effects of imbalance, misalignment, looseness or wear (e.g. bearings). The trip-point setting range is 0.1 →2.2 in\/s. The VS1 is designed per ISO 10816-1 Mechanical Vibration - Evaluation of machine Vibration by measurements on non-rotating parts.","VS2 The VS2 is a high-level vibration switch optimized to monitor intentionally vibrating machinery (e.g. vibratory conveyors, hammer-mills) for the effects of imbalance, excessive load, mechanical failure or unintended machine shutdown and alarm when vibration exceeds or falls below the trip-point setting. The trip-point setting range is 2.0 →26 in\/s.

VS1 振动传感器技术参数

点击查看 0 个替代产品
规格项 参数值 勾选搜索替代
特 性
测量轴 Single
线速度 0.1000 to 2.2 in/sec (0.1524 to 3.35 m/min)
特征 Event Triggered
环 境
工作温度范围 -40 to 60 F (-40 to 16 C)
物 理
传感器安装 Stud or Bolt-on
更多技术信息
产品类型 Sensor / Transducer; Switch; Monitor
更多规格
产品类别 Vibration Sensors
加速度 -50 to 50 g
频率范围 10 Hz
感应机理 MEMS

产品替代

找到 个替代产品

振动和加速度传感器交流圈

约9圈友等你加入

    加载中···

    专家支持

    0 / 300

    选择图片

    确定提交

    提交成功

    系统自动将您的问题推送给专家解答

    查看专家解答
    请扫码进入传感圈小程序

    如何查看专家解答您的问题?

    1
    2
    3
    4