产品介绍
Systems for vibration monitoring and diagnostics – vibration sensors and transmitters","The unit is easy to set up without needing any additional parameter setting software.The transmitters are designed and approved for use in hazardous areas according to the applicable directives.The vibration transmitter of the VKV series has an additional switching output that can be used as alarm output. Two setting rings (easy-turn) on the unit allow intuitive and accurate setting of the switch point and response delay. A scale shows the set values. Two highly visible LEDs indicate the switching status and readiness for operation.Due to the possibility of mechanical locking, unauthorised manipulation is excluded. The protective cap, which is optionally available, ensures protection against tampering. It is often used for condition monitoring of ventilators or fans, where it reliably detects damaged impellers.","The VN electronic vibration sensor has two switching outputs. One of the outputs can be used for the pre-alarm and the other one for the main alarm. The pre-alarm allows the user to schedule and perform maintenance actions during regular operation breaks. A main alarm signifies that a critical machine state is reached; the switching signal can be used to shut down the system. Alternatively, the user can configure one of the outputs as an analogue output to monitor the overall vibration.","The analogue input can be used to monitor an additional parameter such as the temperature. Like vibration, temperature is often used as a key indicator of the state of a machine.","The parameters are set with parameter setting software via a USB interface which also supplies the sensor with operating voltage. An unbalanced machine vibrates dependent on its revolutions. The sensor can be set according to this frequency or according to the damage frequencies of the rolling element bearings to be monitored. A bright multicolour display indicates the measured values. Changing colours (green - yellow - red) signal the current condition of the machine.
VVB010 振动传感器技术参数
规格项 | 参数值 | 勾选搜索替代 |
特 性 | ||
测量轴 | Single | |
线速度 | 0.0 to 45 in/sec (0.0 to 68.58 m/min) | |
环 境 | ||
工作温度范围 | -30 to 80 F (-34 to 27 C) | |
最大冲击 | 50 g | |
物 理 | ||
传感器安装 | set screw ;Other | |
更多规格 | ||
加速度 | 0.0 to 50 g | |
频率范围 | 2 to 10000 Hz | |
精度 | 2.00 +/-% FS | |
产品类别 | Vibration Sensors | |
感应机理 | MEMS |
产品替代
声明:本产品内容及配图源自互联网收集或平台用户自行上传,目的在于传递更多信息,并不代表本网赞同其观点或证实其内容真实性,不承担此类作品侵权行为的直接责任及连带责任。如涉及作品内容、版权等问题,请联系本网处理,侵权内容将在一周内下架整改。
振动传感器相关品牌
振动传感器同类产品
加载中···