Banner 邦纳 SBF1 光纤接近传感器

特性

• 传感行业最灵活的模块化传感器家族，允许超过5000个定制配置的交流和直流电源
• 交流模式是物理和电可互换重型工业限制开关提供非接触控制
• 辅助信号强度指示系统可随时通知您传感器的状态 规格
• 增强型valox外壳，额定nema 3，iec ip54
• Operating Temperature: –40°C to 70°C
• 传感行业最灵活的模块化传感器系列，允许5000多个交流和直流电源的定制配置

Banner MULTI-BEAM® sensors are compact modular self contained photoelectric switches. Each MULT-BEAM® solution consists of 3 components — Scanner Block, Power Block, and Logic Module. The Scanner Block contains the complete modulated photoelectric amplifier as well as the emitter and receiver optoelements. It also contains the sensing optics and the housing for the other two modules. The Power Block provides the interface between the scanner and the external circuit. It contains a power supply for the MULTI-BEAM® plus a switching device to interface the circuit to the controller. The Logic Module (not required for opposed mode emitters) interconnects the power block and scanner block both electrically and mechanically. It provides the desired timing logic function (if any), plus the ability to program the output for either light or dark response. Create a Photoelectric Based on Your Application Requirements Step 1: Choose a Sensor Block for the Required Sensing Mode Step 2: Choose a Power Block for the Required Sensor Power (AC or DC) and Output Step 3: Choose a Logic Module (Not Required for Opposed Mode Emitters) Step 4: Plug in the Power and Logic Components into the Sensor Block Step 5: Select Additional Options (Fiber Optic Cables, Mounting Brackets) as NeededThe 3 and 4 wire MULTI-BEAM® offer the greatest sensing configurations. They permit either AC or DC operations and offer the fastest response time and the greatest sensing ranges. MULTI-BEAM® 3 and 4 Wire Scanner Blocks offer a complete complement of sensing modes. There are 3 or more models for each sensing mode, resulting in a choice of exactly the right sensor for any application. The high power models (10 millisecond response time) offer greater optical sensing power than any other industrial sensor. Features