小程序
传感搜
传感圈
制冷设备
行业应用
精准 模糊
应用场景

相关阅读

  • Mile-X Equipment, Inc. CPSLS790B 检漏仪

    CPS LS790B检漏仪微处理器控制的检漏仪，检测所有制冷剂和混合物-R12、R22、R502、R123、R134a

  • Hansen Technologies Corporation SEE-LEVEL Refrigerant Liquid Indicators 料位控制器

    Hansen SEE-LEVEL™制冷剂液体指示器提供工业和商业制冷系统中真实液位的简单指示。

  • Electro Optical Components, Inc. IR Windows 红外线视窗

    视窗材料:Barium Fluoride, Silicon, Zinc Selenide, Sapphire, Germanium ;Other
    产品类别:Infrared Windows
    视窗材料:Barium Fluoride, Silicon, Zinc Selenide, Sapphire, Germanium ;Other
    产品类别:Infrared Windows

  • Danfoss 丹佛斯 SGP N & SGP I & SGP X 观察窗

    视窗形状:Circular
    连接类型:Available with Flare, Solder and Socket Connections ;Other
    螺纹或法兰尺寸:0.2500 to 0.8750 inch (6.35 to 22.22 mm)
    压力额定值:754 psi (531 m H2O)
    窗口材质:Glass
    主体 / 外壳材料:Copper Alloy
    产品类别:Sight Windows
    视窗形状:Circular
    连接类型:Available with Flare, Solder and Socket Connections ;Other
    螺纹或法兰尺寸:0.2500 to 0.8750 inch (6.35 to 22.22 mm)
    压力额定值:754 psi (531 m H2O)
    窗口材质:Glass
    主体 / 外壳材料:Copper Alloy
    产品类别:Sight Windows

  • 大立科技 DLD-T系列 测温型红外热像仪（在线）

    160×120/384×288/640×480像素非制冷焦平面微热型探测器适用于小区、监狱周界、码头、公园、道路等要求日夜监控的场合。

  • 大立科技 DLD-M330C 监控单机

    640*512像素 碲镉汞制冷型焦平面探测器适用于边海防、海事、海关缉私、桥梁等要求日夜监控的场合。

  • 大立科技 DLD-M360 监控单机

    320×256像素碲镉汞制冷型焦平面探测器适用于边海防、海事、海关缉私、桥梁等要求日夜监控的场合。

  • 大立科技 DLD-M600 监控单机

    320*256/640*512像素碲镉汞制冷型焦平面探测器机身黑色/白色可选适用于边海防、海事、海关缉私、桥梁等要求日夜监控的场合。

  • 大立科技 MC16BTUC350 / MD16ATUC350 红外热像仪机芯组件

    M系列USB小型化红外成像测温相机，采用自主研发生产的非制冷红外阵列传感器，提供17um、25um像元，160×120等不同像元和面阵分辨率规格的产品。

  • InfiRay 艾睿光电 RTD3172CR 陶瓷封装

    RTD3172CR红外探测器产品采用自主研发非制冷VOx热成像传感器，像元尺寸为17μm，分辨率为384×288。RTD3172CR红外探测器产品具有功耗低、体积小、无TEC等优点，非常适合于低功耗、尺寸敏感的应用场合。

  • InfiRay 艾睿光电 RTD6122CR 陶瓷封装

    RTD6122CR红外探测器产品采用自主研发非制冷VOx热成像传感器，像元尺寸为12μm，分辨率为640×512。RTD6122CR产品具有功耗低、体积小、无TEC等优点，非常适合于低功耗、尺寸敏感的应用场合。

  • Delta OHM HD49-S-17-E-TO2-10-L 湿度传感器

    HD48… and HD49… series of transmitters measure temperature, relative humidity and the dew point temperature.Versions with only standard analog output or with only RS485 output with MODBUS‑ RTU protocol are available. The models with analog output provide a signal suitable for transmission to a remote display, recorder or PLC. The models with RS485 output are suitable for connection to a PC or PLC.The models of the HD48… series are active transmitters and accept both direct and 24Vac alternating power supply; they have standard current (4…20 mA) or voltage (0…10V) outputs, or a serial RS485 output, depending on the model. The models of the HD49… series are passive transmitters and thus suitable to be inserted in a 4…20 mA current loop.Both series of transmitters are designed for temperature and humidity control in conditioning and ventilation applications (HVAC/BEMS) in the following sectors: pharmacy, museums, clean rooms, ventilation ducts, industrial and civil sectors, crowded places, canteens, auditoria, gyms, high-density farms, greenhouses, etc.The transmitters measure relative humidity with a well proven temperature compensated capacitive sensor that assures precise and reliable measurements in the course of time. Both HD48… and HD49… series are available in two probe temperature ranges: standard -20…+80 °C and extended -40…+150 °C for the most critical applications. A stainless steel 10 μm filter protects the sensors against dust and particles (other filters are available for different applications).The transmitters are factory calibrated and no further adjustments are required.Each series is available in different versions: with horizontal probe for duct mounting (HD48…TO…, HD49… TO…) with vertical probe for wall mounting (HD48…TV…, HD49… TV…); with remote probe connected to the transmitter by means of a cable (HD48…TC…, HD49…TC…). Cable lengths available are 2, 5 and 10 m. The probes can be supplied in two different lengths: 135 mm or 335 mm. Various accessories are available for the installation: for example to fix the probe to the duct, it can be used the HD9008.31 flange, a 3/8” universal biconical connection or a PG16 metal cable gland (Ø 10…14 mm). A 4-digit optional display (“L” model) allows to display the measured parameters in a continuous or sequential mode.

  • Delta OHM HD49-S-77-E-TC1-5-L 湿度传感器

    HD48… and HD49… series of transmitters measure temperature, relative humidity and the dew point temperature.Versions with only standard analog output or with only RS485 output with MODBUS‑ RTU protocol are available. The models with analog output provide a signal suitable for transmission to a remote display, recorder or PLC. The models with RS485 output are suitable for connection to a PC or PLC.The models of the HD48… series are active transmitters and accept both direct and 24Vac alternating power supply; they have standard current (4…20 mA) or voltage (0…10V) outputs, or a serial RS485 output, depending on the model. The models of the HD49… series are passive transmitters and thus suitable to be inserted in a 4…20 mA current loop.Both series of transmitters are designed for temperature and humidity control in conditioning and ventilation applications (HVAC/BEMS) in the following sectors: pharmacy, museums, clean rooms, ventilation ducts, industrial and civil sectors, crowded places, canteens, auditoria, gyms, high-density farms, greenhouses, etc.The transmitters measure relative humidity with a well proven temperature compensated capacitive sensor that assures precise and reliable measurements in the course of time. Both HD48… and HD49… series are available in two probe temperature ranges: standard -20…+80 °C and extended -40…+150 °C for the most critical applications. A stainless steel 10 μm filter protects the sensors against dust and particles (other filters are available for different applications).The transmitters are factory calibrated and no further adjustments are required.Each series is available in different versions: with horizontal probe for duct mounting (HD48…TO…, HD49… TO…) with vertical probe for wall mounting (HD48…TV…, HD49… TV…); with remote probe connected to the transmitter by means of a cable (HD48…TC…, HD49…TC…). Cable lengths available are 2, 5 and 10 m. The probes can be supplied in two different lengths: 135 mm or 335 mm. Various accessories are available for the installation: for example to fix the probe to the duct, it can be used the HD9008.31 flange, a 3/8” universal biconical connection or a PG16 metal cable gland (Ø 10…14 mm). A 4-digit optional display (“L” model) allows to display the measured parameters in a continuous or sequential mode.

  • Delta OHM HD48-S-77-E-TC1-10-L 湿度传感器

    HD48… and HD49… series of transmitters measure temperature, relative humidity and the dew point temperature.Versions with only standard analog output or with only RS485 output with MODBUS‑ RTU protocol are available. The models with analog output provide a signal suitable for transmission to a remote display, recorder or PLC. The models with RS485 output are suitable for connection to a PC or PLC.The models of the HD48… series are active transmitters and accept both direct and 24Vac alternating power supply; they have standard current (4…20 mA) or voltage (0…10V) outputs, or a serial RS485 output, depending on the model. The models of the HD49… series are passive transmitters and thus suitable to be inserted in a 4…20 mA current loop.Both series of transmitters are designed for temperature and humidity control in conditioning and ventilation applications (HVAC/BEMS) in the following sectors: pharmacy, museums, clean rooms, ventilation ducts, industrial and civil sectors, crowded places, canteens, auditoria, gyms, high-density farms, greenhouses, etc.The transmitters measure relative humidity with a well proven temperature compensated capacitive sensor that assures precise and reliable measurements in the course of time. Both HD48… and HD49… series are available in two probe temperature ranges: standard -20…+80 °C and extended -40…+150 °C for the most critical applications. A stainless steel 10 μm filter protects the sensors against dust and particles (other filters are available for different applications).The transmitters are factory calibrated and no further adjustments are required.Each series is available in different versions: with horizontal probe for duct mounting (HD48…TO…, HD49… TO…) with vertical probe for wall mounting (HD48…TV…, HD49… TV…); with remote probe connected to the transmitter by means of a cable (HD48…TC…, HD49…TC…). Cable lengths available are 2, 5 and 10 m. The probes can be supplied in two different lengths: 135 mm or 335 mm. Various accessories are available for the installation: for example to fix the probe to the duct, it can be used the HD9008.31 flange, a 3/8” universal biconical connection or a PG16 metal cable gland (Ø 10…14 mm). A 4-digit optional display (“L” model) allows to display the measured parameters in a continuous or sequential mode.

  • Delta OHM HD49-S-07-E-TO2-2-L 湿度传感器

    HD48… and HD49… series of transmitters measure temperature, relative humidity and the dew point temperature.Versions with only standard analog output or with only RS485 output with MODBUS‑ RTU protocol are available. The models with analog output provide a signal suitable for transmission to a remote display, recorder or PLC. The models with RS485 output are suitable for connection to a PC or PLC.The models of the HD48… series are active transmitters and accept both direct and 24Vac alternating power supply; they have standard current (4…20 mA) or voltage (0…10V) outputs, or a serial RS485 output, depending on the model. The models of the HD49… series are passive transmitters and thus suitable to be inserted in a 4…20 mA current loop.Both series of transmitters are designed for temperature and humidity control in conditioning and ventilation applications (HVAC/BEMS) in the following sectors: pharmacy, museums, clean rooms, ventilation ducts, industrial and civil sectors, crowded places, canteens, auditoria, gyms, high-density farms, greenhouses, etc.The transmitters measure relative humidity with a well proven temperature compensated capacitive sensor that assures precise and reliable measurements in the course of time. Both HD48… and HD49… series are available in two probe temperature ranges: standard -20…+80 °C and extended -40…+150 °C for the most critical applications. A stainless steel 10 μm filter protects the sensors against dust and particles (other filters are available for different applications).The transmitters are factory calibrated and no further adjustments are required.Each series is available in different versions: with horizontal probe for duct mounting (HD48…TO…, HD49… TO…) with vertical probe for wall mounting (HD48…TV…, HD49… TV…); with remote probe connected to the transmitter by means of a cable (HD48…TC…, HD49…TC…). Cable lengths available are 2, 5 and 10 m. The probes can be supplied in two different lengths: 135 mm or 335 mm. Various accessories are available for the installation: for example to fix the probe to the duct, it can be used the HD9008.31 flange, a 3/8” universal biconical connection or a PG16 metal cable gland (Ø 10…14 mm). A 4-digit optional display (“L” model) allows to display the measured parameters in a continuous or sequential mode.

  • Delta OHM HD49-S-01-E-TO2-2-L 湿度传感器

    HD48… and HD49… series of transmitters measure temperature, relative humidity and the dew point temperature.Versions with only standard analog output or with only RS485 output with MODBUS‑ RTU protocol are available. The models with analog output provide a signal suitable for transmission to a remote display, recorder or PLC. The models with RS485 output are suitable for connection to a PC or PLC.The models of the HD48… series are active transmitters and accept both direct and 24Vac alternating power supply; they have standard current (4…20 mA) or voltage (0…10V) outputs, or a serial RS485 output, depending on the model. The models of the HD49… series are passive transmitters and thus suitable to be inserted in a 4…20 mA current loop.Both series of transmitters are designed for temperature and humidity control in conditioning and ventilation applications (HVAC/BEMS) in the following sectors: pharmacy, museums, clean rooms, ventilation ducts, industrial and civil sectors, crowded places, canteens, auditoria, gyms, high-density farms, greenhouses, etc.The transmitters measure relative humidity with a well proven temperature compensated capacitive sensor that assures precise and reliable measurements in the course of time. Both HD48… and HD49… series are available in two probe temperature ranges: standard -20…+80 °C and extended -40…+150 °C for the most critical applications. A stainless steel 10 μm filter protects the sensors against dust and particles (other filters are available for different applications).The transmitters are factory calibrated and no further adjustments are required.Each series is available in different versions: with horizontal probe for duct mounting (HD48…TO…, HD49… TO…) with vertical probe for wall mounting (HD48…TV…, HD49… TV…); with remote probe connected to the transmitter by means of a cable (HD48…TC…, HD49…TC…). Cable lengths available are 2, 5 and 10 m. The probes can be supplied in two different lengths: 135 mm or 335 mm. Various accessories are available for the installation: for example to fix the probe to the duct, it can be used the HD9008.31 flange, a 3/8” universal biconical connection or a PG16 metal cable gland (Ø 10…14 mm). A 4-digit optional display (“L” model) allows to display the measured parameters in a continuous or sequential mode.

  • Delta OHM HD49-S-77-E-TV-10-L 湿度传感器

    HD48… and HD49… series of transmitters measure temperature, relative humidity and the dew point temperature.Versions with only standard analog output or with only RS485 output with MODBUS‑ RTU protocol are available. The models with analog output provide a signal suitable for transmission to a remote display, recorder or PLC. The models with RS485 output are suitable for connection to a PC or PLC.The models of the HD48… series are active transmitters and accept both direct and 24Vac alternating power supply; they have standard current (4…20 mA) or voltage (0…10V) outputs, or a serial RS485 output, depending on the model. The models of the HD49… series are passive transmitters and thus suitable to be inserted in a 4…20 mA current loop.Both series of transmitters are designed for temperature and humidity control in conditioning and ventilation applications (HVAC/BEMS) in the following sectors: pharmacy, museums, clean rooms, ventilation ducts, industrial and civil sectors, crowded places, canteens, auditoria, gyms, high-density farms, greenhouses, etc.The transmitters measure relative humidity with a well proven temperature compensated capacitive sensor that assures precise and reliable measurements in the course of time. Both HD48… and HD49… series are available in two probe temperature ranges: standard -20…+80 °C and extended -40…+150 °C for the most critical applications. A stainless steel 10 μm filter protects the sensors against dust and particles (other filters are available for different applications).The transmitters are factory calibrated and no further adjustments are required.Each series is available in different versions: with horizontal probe for duct mounting (HD48…TO…, HD49… TO…) with vertical probe for wall mounting (HD48…TV…, HD49… TV…); with remote probe connected to the transmitter by means of a cable (HD48…TC…, HD49…TC…). Cable lengths available are 2, 5 and 10 m. The probes can be supplied in two different lengths: 135 mm or 335 mm. Various accessories are available for the installation: for example to fix the probe to the duct, it can be used the HD9008.31 flange, a 3/8” universal biconical connection or a PG16 metal cable gland (Ø 10…14 mm). A 4-digit optional display (“L” model) allows to display the measured parameters in a continuous or sequential mode.

  • Delta OHM HD48-S-01-E-TC1-5-L 湿度传感器

    HD48… and HD49… series of transmitters measure temperature, relative humidity and the dew point temperature.Versions with only standard analog output or with only RS485 output with MODBUS‑ RTU protocol are available. The models with analog output provide a signal suitable for transmission to a remote display, recorder or PLC. The models with RS485 output are suitable for connection to a PC or PLC.The models of the HD48… series are active transmitters and accept both direct and 24Vac alternating power supply; they have standard current (4…20 mA) or voltage (0…10V) outputs, or a serial RS485 output, depending on the model. The models of the HD49… series are passive transmitters and thus suitable to be inserted in a 4…20 mA current loop.Both series of transmitters are designed for temperature and humidity control in conditioning and ventilation applications (HVAC/BEMS) in the following sectors: pharmacy, museums, clean rooms, ventilation ducts, industrial and civil sectors, crowded places, canteens, auditoria, gyms, high-density farms, greenhouses, etc.The transmitters measure relative humidity with a well proven temperature compensated capacitive sensor that assures precise and reliable measurements in the course of time. Both HD48… and HD49… series are available in two probe temperature ranges: standard -20…+80 °C and extended -40…+150 °C for the most critical applications. A stainless steel 10 μm filter protects the sensors against dust and particles (other filters are available for different applications).The transmitters are factory calibrated and no further adjustments are required.Each series is available in different versions: with horizontal probe for duct mounting (HD48…TO…, HD49… TO…) with vertical probe for wall mounting (HD48…TV…, HD49… TV…); with remote probe connected to the transmitter by means of a cable (HD48…TC…, HD49…TC…). Cable lengths available are 2, 5 and 10 m. The probes can be supplied in two different lengths: 135 mm or 335 mm. Various accessories are available for the installation: for example to fix the probe to the duct, it can be used the HD9008.31 flange, a 3/8” universal biconical connection or a PG16 metal cable gland (Ø 10…14 mm). A 4-digit optional display (“L” model) allows to display the measured parameters in a continuous or sequential mode.

  • Delta OHM HD48-S-17-E-TV-2-L 湿度传感器

    HD48… and HD49… series of transmitters measure temperature, relative humidity and the dew point temperature.Versions with only standard analog output or with only RS485 output with MODBUS‑ RTU protocol are available. The models with analog output provide a signal suitable for transmission to a remote display, recorder or PLC. The models with RS485 output are suitable for connection to a PC or PLC.The models of the HD48… series are active transmitters and accept both direct and 24Vac alternating power supply; they have standard current (4…20 mA) or voltage (0…10V) outputs, or a serial RS485 output, depending on the model. The models of the HD49… series are passive transmitters and thus suitable to be inserted in a 4…20 mA current loop.Both series of transmitters are designed for temperature and humidity control in conditioning and ventilation applications (HVAC/BEMS) in the following sectors: pharmacy, museums, clean rooms, ventilation ducts, industrial and civil sectors, crowded places, canteens, auditoria, gyms, high-density farms, greenhouses, etc.The transmitters measure relative humidity with a well proven temperature compensated capacitive sensor that assures precise and reliable measurements in the course of time. Both HD48… and HD49… series are available in two probe temperature ranges: standard -20…+80 °C and extended -40…+150 °C for the most critical applications. A stainless steel 10 μm filter protects the sensors against dust and particles (other filters are available for different applications).The transmitters are factory calibrated and no further adjustments are required.Each series is available in different versions: with horizontal probe for duct mounting (HD48…TO…, HD49… TO…) with vertical probe for wall mounting (HD48…TV…, HD49… TV…); with remote probe connected to the transmitter by means of a cable (HD48…TC…, HD49…TC…). Cable lengths available are 2, 5 and 10 m. The probes can be supplied in two different lengths: 135 mm or 335 mm. Various accessories are available for the installation: for example to fix the probe to the duct, it can be used the HD9008.31 flange, a 3/8” universal biconical connection or a PG16 metal cable gland (Ø 10…14 mm). A 4-digit optional display (“L” model) allows to display the measured parameters in a continuous or sequential mode.

  • Delta OHM HD48-S-77-E-TV-10-L 湿度传感器

    HD48… and HD49… series of transmitters measure temperature, relative humidity and the dew point temperature.Versions with only standard analog output or with only RS485 output with MODBUS‑ RTU protocol are available. The models with analog output provide a signal suitable for transmission to a remote display, recorder or PLC. The models with RS485 output are suitable for connection to a PC or PLC.The models of the HD48… series are active transmitters and accept both direct and 24Vac alternating power supply; they have standard current (4…20 mA) or voltage (0…10V) outputs, or a serial RS485 output, depending on the model. The models of the HD49… series are passive transmitters and thus suitable to be inserted in a 4…20 mA current loop.Both series of transmitters are designed for temperature and humidity control in conditioning and ventilation applications (HVAC/BEMS) in the following sectors: pharmacy, museums, clean rooms, ventilation ducts, industrial and civil sectors, crowded places, canteens, auditoria, gyms, high-density farms, greenhouses, etc.The transmitters measure relative humidity with a well proven temperature compensated capacitive sensor that assures precise and reliable measurements in the course of time. Both HD48… and HD49… series are available in two probe temperature ranges: standard -20…+80 °C and extended -40…+150 °C for the most critical applications. A stainless steel 10 μm filter protects the sensors against dust and particles (other filters are available for different applications).The transmitters are factory calibrated and no further adjustments are required.Each series is available in different versions: with horizontal probe for duct mounting (HD48…TO…, HD49… TO…) with vertical probe for wall mounting (HD48…TV…, HD49… TV…); with remote probe connected to the transmitter by means of a cable (HD48…TC…, HD49…TC…). Cable lengths available are 2, 5 and 10 m. The probes can be supplied in two different lengths: 135 mm or 335 mm. Various accessories are available for the installation: for example to fix the probe to the duct, it can be used the HD9008.31 flange, a 3/8” universal biconical connection or a PG16 metal cable gland (Ø 10…14 mm). A 4-digit optional display (“L” model) allows to display the measured parameters in a continuous or sequential mode.
首页
上一页
下一页
尾页