Vented Long Elbow Brass Liquid Level Gages can be used on oil bearings, gear boxes, crank cases, transformers, switches or any application requiring visual indication of liquid level. The leak proof construction, large vent hole and unrestricted passages permit fast and accurate liquid level response. This gage features a special drain base.","The base of a Long Elbow Brass Gage is an additional 3\/4 longer than a Short Elbow Brass Gage, providing additional clearance from the mounting surface. The square shank with pipe thread screws horizontally into a tapped hole. The gage can be disassembled for installation in very tight places.","This brass gage features a Bottom Drain controlled by a front drain stem. The 5\/8 diameter glass sight is protected by a brass shield. The shield can be revolved to the most convenient position for viewing or taken off completely for cleaning. A protected vent hole in the cap reduces the possibility of dust, dirt, or moisture getting inside the gage. The gage uses only atmospheric pressure. A Teflon washer reduces friction between the cap and the glass during installation and adjustments. Buna-N seals are used. The unit tolerates temperatures up to 225° F.","Dimensions:","A Height from Center of Mounting Hole 6 3\/4","B Sight Opening 5 21\/32","C Length of Mounting Thread 5\/8\

Vented Long Elbow Brass Gages can be used on oil bearings, gear boxes, crank cases, transformers, switches or any application requiring visual indication of liquid level. The leak proof construction, large vent hole and unrestricted passages permit fast and accurate liquid level response.","The base of a Long Elbow Brass Gage is an additional 1\/2 longer than a Short Elbow Brass Gage, providing additional clearance from the mounting surface. The square shank with pipe thread screws horizontally into a tapped hole. The gage can be disassembled for installation in very tight places.","This brass elbow gage features a 1\/2 diameter glass sight protected by a shield. The shield can be revolved to the most convenient position for viewing or taken off completely for cleaning. A protected vent hole in the cap reduces the possibility of dust, dirt, or moisture getting inside the gage. The gage uses only atmospheric pressure. A Teflon washer reduces friction between the cap and the glass during installation and adjustments. Buna-N seals are used. The unit tolerates temperatures up to 225° F.","Long Elbow Brass Gages can also be custom built with optional parts including alternate caps and\/or drain bases of varying lengths and mounting threads. To view optional parts, click here.","Dimensions:","A Height from Center of Mounting Hole 1 15\/16","B Sight Opening 1 1\/32","C Length of Mounting Thread 7 \/16\"","Length of Base 2 1\/8

通风长弯头黄铜量规可用于油轴承、齿轮箱、曲柄箱、变压器、开关或任何需要目视指示液位的应用。防漏结构、大通气孔和不受限制的通道允许快速准确的液位响应。，长弯头黄铜压力表的底座比短弯头黄铜压力表额外长1/2，提供与安装表面的额外间隙。带有管螺纹螺钉的方柄水平地拧入螺纹孔中。该量规可拆卸安装在非常紧密的地方。，这种黄铜弯头量规具有直径为1\/2的玻璃观察孔，由一个防护罩保护。护罩可以旋转到最方便查看的位置，也可以完全取下进行清洁。盖子上有一个受保护的通风孔，可以减少灰尘、灰尘或湿气进入压力计内部的可能性。压力表只使用大气压力。在安装和调整过程中，聚四氟乙烯垫圈可减少盖和玻璃之间的摩擦。使用丁腈橡胶密封件。该装置可承受高达225° F.，长弯头黄铜量规也可定制，带有可选部件，包括不同长度的替代盖和/或排水底座和安装螺纹。要查看可选部件，请单击此处。，尺寸：，A距安装孔1 15 \/16的高度，B观察孔1 1 \/32，C安装螺纹的长度5 \/16\，底座2的长度1 \/8

Vented Long Elbow Brass Gages can be used on oil bearings, gear boxes, crank cases, transformers, switches or any application requiring visual indication of liquid level. The leak proof construction, large vent hole and unrestricted passages permit fast and accurate liquid level response.","The base of a Long Elbow Brass Gage is an additional 1\/2 longer than a Short Elbow Brass Gage, providing additional clearance from the mounting surface. The square shank with pipe thread screws horizontally into a tapped hole. The gage can be disassembled for installation in very tight places.","This brass elbow gage features a 1\/2 diameter glass sight protected by a shield. The shield can be revolved to the most convenient position for viewing or taken off completely for cleaning. A protected vent hole in the cap reduces the possibility of dust, dirt, or moisture getting inside the gage. The gage uses only atmospheric pressure. A Teflon washer reduces friction between the cap and the glass during installation and adjustments. Buna-N seals are used. The unit tolerates temperatures up to 225° F.","Long Elbow Brass Gages can also be custom built with optional parts including alternate caps and\/or drain bases of varying lengths and mounting threads. To view optional parts, click here.","Dimensions:","A Height from Center of Mounting Hole 1 15\/16","B Sight Opening 1 1\/32","C Length of Mounting Thread 1\/2 \"","Length of Base 2 1\/8

通风长弯头黄铜量规可用于油轴承、齿轮箱、曲柄箱、变压器、开关或任何需要目视指示液位的应用。防漏结构、大通气孔和不受限制的通道允许快速准确的液位响应。，长弯头黄铜压力表的底座比短弯头黄铜压力表额外长1/2，提供与安装表面的额外间隙。带有管螺纹螺钉的方柄水平地拧入螺纹孔中。该量规可拆卸安装在非常紧密的地方。，这种黄铜弯头量规具有直径为1\/2的玻璃观察孔，由一个防护罩保护。护罩可以旋转到最方便查看的位置，也可以完全取下进行清洁。盖子上有一个受保护的通风孔，可以减少灰尘、灰尘或湿气进入压力计内部的可能性。压力表只使用大气压力。在安装和调整过程中，聚四氟乙烯垫圈可减少盖和玻璃之间的摩擦。使用丁腈橡胶密封件。该装置可承受高达225° F.，长弯头黄铜量规也可定制，带有可选部件，包括不同长度的替代盖和/或排水底座和安装螺纹。要查看可选部件，请单击此处。，尺寸：，A距安装孔2 7 \/16的高度，B观察孔1 17 \/32，C安装螺纹长度7 \/16\，底座2 1\/8的长度

Vented Long Elbow Brass Gages can be used on oil bearings, gear boxes, crank cases, transformers, switches or any application requiring visual indication of liquid level. The leak proof construction, large vent hole and unrestricted passages permit fast and accurate liquid level response.","The base of a Long Elbow Brass Gage is an additional 1\/2 longer than a Short Elbow Brass Gage, providing additional clearance from the mounting surface. The square shank with pipe thread screws horizontally into a tapped hole. The gage can be disassembled for installation in very tight places.","This brass elbow gage features a 1\/2 diameter glass sight protected by a shield. The shield can be revolved to the most convenient position for viewing or taken off completely for cleaning. A protected vent hole in the cap reduces the possibility of dust, dirt, or moisture getting inside the gage. The gage uses only atmospheric pressure. A Teflon washer reduces friction between the cap and the glass during installation and adjustments. Buna-N seals are used. The unit tolerates temperatures up to 225° F.","Long Elbow Brass Gages can also be custom built with optional parts including alternate caps and\/or drain bases of varying lengths and mounting threads. To view optional parts, click here.","Dimensions:","A Height from Center of Mounting Hole 2 7 \/16","B Sight Opening 1 17\/32","C Length of Mounting Thread 5\/16\"","Length of Base 2 1\/8

通风长弯头黄铜量规可用于油轴承、齿轮箱、曲柄箱、变压器、开关或任何需要目视指示液位的应用。防漏结构、大通气孔和不受限制的通道允许快速准确的液位响应。，长弯头黄铜液位计的底座比短弯头黄铜液位计额外长1/2，与安装表面之间提供额外的间隙。带有管螺纹螺钉的方柄水平地拧入螺纹孔中。该量规可拆卸安装在非常紧密的地方。，这种黄铜弯头量规具有直径为1\/2的玻璃观察孔，由一个防护罩保护。护罩可以旋转到最方便查看的位置，也可以完全取下进行清洁。盖子上有一个受保护的通风孔，可以减少灰尘、灰尘或湿气进入压力计内部的可能性。压力表只使用大气压力。在安装和调整过程中，聚四氟乙烯垫圈可减少盖和玻璃之间的摩擦。使用丁腈橡胶密封件。该装置可承受高达225° F.，长弯头黄铜量规也可定制，带有可选部件，包括不同长度的替代盖和/或排水底座和安装螺纹。要查看可选部件，请单击此处。，尺寸：，A距安装孔2 7 \/16的高度，B观察孔1 17 \/32，C安装螺纹长度1 \/2\，底座2 1\/8的长度

Vented Long Elbow Brass Liquid Level Gages can be used on oil bearings, gear boxes, crank cases, transformers, switches or any application requiring visual indication of liquid level. The leak proof construction, large vent hole and unrestricted passages permit fast and accurate liquid level response.","The base of a Long Elbow Brass Gage is an additional 3\/4 longer than a Short Elbow Brass Gage (with 5\/8\" diameter glass), providing additional clearance from the mounting surface. The square shank with pipe thread screws horizontally into a tapped hole. The gage can be disassembled for installation in very tight places.","This brass elbow gage features a 5\/8 diameter glass sight protected by a shield. The shield can be revolved to the most convenient position for viewing or taken off completely for cleaning. A protected vent hole in the cap reduces the possibility of dust, dirt, or moisture getting inside the gage. The gage uses only atmospheric pressure. A Teflon washer reduces friction between the cap and the glass during installation and adjustments. Buna-N seals are used. The unit tolerates temperatures up to 225° F.","Long Elbow Brass Gages can also be custom built with optional parts including alternate caps and\/or drain bases of varying lengths and mounting threads. To view optional parts, click here.","Dimensions:","A Height from Center of Mounting Hole 13 3\/4 ","B Sight Opening 12 21 \/32","C Length of Mounting Thread 5\/8 \"","Length of Base 2 31\/32

Vented Long Elbow Brass Liquid Level Gages can be used on oil bearings, gear boxes, crank cases, transformers, switches or any application requiring visual indication of liquid level. The leak proof construction, large vent hole and unrestricted passages permit fast and accurate liquid level response.","The base of a Long Elbow Brass Gage is an additional 3\/4 longer than a Short Elbow Brass Gage (with 5\/8\" diameter glass), providing additional clearance from the mounting surface. The square shank with pipe thread screws horizontally into a tapped hole. The gage can be disassembled for installation in very tight places.","This brass elbow gage features a 5\/8 diameter glass sight protected by a shield. The shield can be revolved to the most convenient position for viewing or taken off completely for cleaning. A protected vent hole in the cap reduces the possibility of dust, dirt, or moisture getting inside the gage. The gage uses only atmospheric pressure. A Teflon washer reduces friction between the cap and the glass during installation and adjustments. Buna-N seals are used. The unit tolerates temperatures up to 225° F.","Long Elbow Brass Gages can also be custom built with optional parts including alternate caps and\/or drain bases of varying lengths and mounting threads. To view optional parts, click here.","Dimensions:","A Height from Center of Mounting Hole 13 3\/4 ","B Sight Opening 12 21 \/32","C Length of Mounting Thread 7 \/16\"","Length of Base 2 31\/32

通风长弯头黄铜液位计可用于油轴承、齿轮箱、曲柄箱、变压器、开关或任何需要目视指示液位的应用。防漏结构、大通气孔和不受限制的通道允许快速准确的液位响应。，长弯头黄铜压力表的底座比短弯头黄铜压力表（带有5\/8直径的玻璃）多出3\/4，提供与安装表面的额外间隙。带有管螺纹螺钉的方柄水平地拧入螺纹孔中。该量规可拆卸安装在非常紧密的地方。，这种黄铜弯头量规具有直径为5\/8的玻璃观察孔，由一个防护罩保护。护罩可以旋转到最方便查看的位置，也可以完全取下进行清洁。盖子上有一个受保护的通风孔，可以减少灰尘、灰尘或湿气进入压力计内部的可能性。压力表只使用大气压力。在安装和调整过程中，聚四氟乙烯垫圈可减少盖和玻璃之间的摩擦。使用丁腈橡胶密封件。该装置可承受高达225° F.，长弯头黄铜量规也可定制，带有可选部件，包括不同长度的替代盖和/或排水底座和安装螺纹。要查看可选部件，请单击此处。，尺寸：，A距安装孔中心的高度13 3 \/4，B观察孔12 21 \/32，C安装螺纹长度1 \/2\，底座2长度31 \/32

Vented Long Elbow Brass Gages can be used on oil bearings, gear boxes, crank cases, transformers, switches or any application requiring visual indication of liquid level. The leak proof construction, large vent hole and unrestricted passages permit fast and accurate liquid level response.","The base of a Long Elbow Brass Liquid Level Gage is an additional 1\/2 longer than a Short Elbow Brass Gage, providing additional clearance from the mounting surface. The square shank with pipe thread screws horizontally into a tapped hole. The gage can be disassembled for installation in very tight places.","This brass elbow gage features a 1\/2 diameter glass sight protected by a shield. The shield can be revolved to the most convenient position for viewing or taken off completely for cleaning. A protected vent hole in the cap reduces the possibility of dust, dirt, or moisture getting inside the gage. The gage uses only atmospheric pressure. A Teflon washer reduces friction between the cap and the glass during installation and adjustments. Buna-N seals are used. The unit tolerates temperatures up to 225° F.","Long Elbow Brass Gages can also be custom built with optional parts including alternate caps and\/or drain bases of varying lengths and mounting threads. To view optional parts, click here.","Dimensions:","A Height from Center of Mounting Hole 2 15 \/16","B Sight Opening 2 1\/32","C Length of Mounting Thread 7 \/16\"","Length of Base 2 1\/8

Vented Long Elbow Brass Gages can be used on oil bearings, gear boxes, crank cases, transformers, switches or any application requiring visual indication of liquid level. The leak proof construction, large vent hole and unrestricted passages permit fast and accurate liquid level response.","The base of a Long Elbow Brass Liquid Level Gage is an additional 1\/2 longer than a Short Elbow Brass Gage, providing additional clearance from the mounting surface. The square shank with pipe thread screws horizontally into a tapped hole. The gage can be disassembled for installation in very tight places.","This brass elbow gage features a 1\/2 diameter glass sight protected by a shield. The shield can be revolved to the most convenient position for viewing or taken off completely for cleaning. A protected vent hole in the cap reduces the possibility of dust, dirt, or moisture getting inside the gage. The gage uses only atmospheric pressure. A Teflon washer reduces friction between the cap and the glass during installation and adjustments. Buna-N seals are used. The unit tolerates temperatures up to 225° F.","Long Elbow Brass Gages can also be custom built with optional parts including alternate caps and\/or drain bases of varying lengths and mounting threads. To view optional parts, click here.","Dimensions:","A Height from Center of Mounting Hole 2 15 \/16","B Sight Opening 2 1\/32","C Length of Mounting Thread 5\/16\"","Length of Base 2 1\/8

Vented Long Elbow Brass Gages can be used on oil bearings, gear boxes, crank cases, transformers, switches or any application requiring visual indication of liquid level. The leak proof construction, large vent hole and unrestricted passages permit fast and accurate liquid level response.","The base of a Long Elbow Brass Liquid Level Gage is an additional 1\/2 longer than a Short Elbow Brass Gage, providing additional clearance from the mounting surface. The square shank with pipe thread screws horizontally into a tapped hole. The gage can be disassembled for installation in very tight places.","This brass elbow gage features a 1\/2 diameter glass sight protected by a shield. The shield can be revolved to the most convenient position for viewing or taken off completely for cleaning. A protected vent hole in the cap reduces the possibility of dust, dirt, or moisture getting inside the gage. The gage uses only atmospheric pressure. A Teflon washer reduces friction between the cap and the glass during installation and adjustments. Buna-N seals are used. The unit tolerates temperatures up to 225° F.","Long Elbow Brass Gages can also be custom built with optional parts including alternate caps and\/or drain bases of varying lengths and mounting threads. To view optional parts, click here.","Dimensions:","A Height from Center of Mounting Hole 2 15 \/16","B Sight Opening 2 1\/32","C Length of Mounting Thread 1\/2 \"","Length of Base 2 1\/8

通风长弯头黄铜量规可用于油轴承、齿轮箱、曲柄箱、变压器、开关或任何需要目视指示液位的应用。防漏结构、大通气孔和不受限制的通道允许快速准确的液位响应。，长弯头黄铜压力表的底座比短弯头黄铜压力表额外长1/2，提供与安装表面的额外间隙。带有管螺纹螺钉的方柄水平地拧入螺纹孔中。该量规可拆卸安装在非常紧密的地方。，这种黄铜弯头量规具有直径为1\/2的玻璃观察孔，由一个防护罩保护。护罩可以旋转到最方便查看的位置，也可以完全取下进行清洁。盖子上有一个受保护的通风孔，可以减少灰尘、灰尘或湿气进入压力计内部的可能性。压力表只使用大气压力。在安装和调整过程中，聚四氟乙烯垫圈可减少盖和玻璃之间的摩擦。使用丁腈橡胶密封件。该装置可承受高达225° F.，长弯头黄铜量规也可定制，带有可选部件，包括不同长度的替代盖和/或排水底座和安装螺纹。要查看可选部件，请单击此处。，尺寸：，A距安装孔中心的高度3 7 \/16，B观察孔2 17 \/32，C安装螺纹的长度7 \/16\，底座2 1\/8的长度

Vented Long Elbow Brass Gages can be used on oil bearings, gear boxes, crank cases, transformers, switches or any application requiring visual indication of liquid level. The leak proof construction, large vent hole and unrestricted passages permit fast and accurate liquid level response.","The base of a Long Elbow Brass Gage is an additional 1\/2 longer than a Short Elbow Brass Gage, providing additional clearance from the mounting surface. The square shank with pipe thread screws horizontally into a tapped hole. The gage can be disassembled for installation in very tight places.","This brass elbow gage features a 1\/2 diameter glass sight protected by a shield. The shield can be revolved to the most convenient position for viewing or taken off completely for cleaning. A protected vent hole in the cap reduces the possibility of dust, dirt, or moisture getting inside the gage. The gage uses only atmospheric pressure. A Teflon washer reduces friction between the cap and the glass during installation and adjustments. Buna-N seals are used. The unit tolerates temperatures up to 225° F.","Long Elbow Brass Gages can also be custom built with optional parts including alternate caps and\/or drain bases of varying lengths and mounting threads. To view optional parts, click here.","Dimensions:","A Height from Center of Mounting Hole 3 7 \/16","B Sight Opening 2 17\/32","C Length of Mounting Thread 5\/16\"","Length of Base 2 1\/8

通风长弯头黄铜量规可用于油轴承、齿轮箱、曲柄箱、变压器、开关或任何需要目视指示液位的应用。防漏结构、大通气孔和不受限制的通道允许快速准确的液位响应。，长弯头黄铜压力表的底座比短弯头黄铜压力表额外长1/2，提供与安装表面的额外间隙。带有管螺纹螺钉的方柄水平地拧入螺纹孔中。该量规可拆卸安装在非常紧密的地方。，这种黄铜弯头量规具有直径为1\/2的玻璃观察孔，由一个防护罩保护。护罩可以旋转到最方便查看的位置，也可以完全取下进行清洁。盖子上有一个受保护的通风孔，可以减少灰尘、灰尘或湿气进入压力计内部的可能性。压力表只使用大气压力。在安装和调整过程中，聚四氟乙烯垫圈可减少盖和玻璃之间的摩擦。使用丁腈橡胶密封件。该装置可承受高达225° F.，长弯头黄铜量规也可定制，带有可选部件，包括不同长度的替代盖和/或排水底座和安装螺纹。要查看可选部件，请单击此处。，尺寸：，A距安装孔中心的高度3 7 \/16，B观察孔2 17 \/32，C安装螺纹长度1 \/2\，底座2 1\/8的长度

通风长弯头黄铜量规可用于油轴承、齿轮箱、曲柄箱、变压器、开关或任何需要目视指示液位的应用。防漏结构、大通气孔和不受限制的通道允许快速准确的液位响应。，长弯头黄铜压力表的底座比短弯头黄铜压力表额外长1/2，提供与安装表面的额外间隙。带有管螺纹螺钉的方柄水平地拧入螺纹孔中。该量规可拆卸安装在非常紧密的地方。，这种黄铜弯头量规具有直径为1\/2的玻璃观察孔，由一个防护罩保护。护罩可以旋转到最方便查看的位置，也可以完全取下进行清洁。盖子上有一个受保护的通风孔，可以减少灰尘、灰尘或湿气进入压力计内部的可能性。压力表只使用大气压力。在安装和调整过程中，聚四氟乙烯垫圈可减少盖和玻璃之间的摩擦。使用丁腈橡胶密封件。该装置可承受高达225° F.，长弯头黄铜量规也可定制，带有可选部件，包括不同长度的替代盖和/或排水底座和安装螺纹。要查看可选部件，请单击此处。，尺寸：，A距安装孔中心的高度3 15 \/16，B观察孔3 1 \/32，C安装螺纹长度7 \/16\，底座2 1\/8的长度

通风长弯头黄铜量规可用于油轴承、齿轮箱、曲柄箱、变压器、开关或任何需要目视指示液位的应用。防漏结构、大通气孔和不受限制的通道允许快速准确的液位响应。，长弯头黄铜压力表的底座比短弯头黄铜压力表额外长1/2，提供与安装表面的额外间隙。带有管螺纹螺钉的方柄水平地拧入螺纹孔中。该量规可拆卸安装在非常紧密的地方。，这种黄铜弯头量规具有直径为1\/2的玻璃观察孔，由一个防护罩保护。护罩可以旋转到最方便查看的位置，也可以完全取下进行清洁。盖子上有一个受保护的通风孔，可以减少灰尘、灰尘或湿气进入压力计内部的可能性。压力表只使用大气压力。在安装和调整过程中，聚四氟乙烯垫圈可减少盖和玻璃之间的摩擦。使用丁腈橡胶密封件。该装置可承受高达225° F.，长弯头黄铜量规也可定制，带有可选部件，包括不同长度的替代盖和/或排水底座和安装螺纹。要查看可选部件，请单击此处。，尺寸：，A距安装孔3中心的高度15 \/16，B观察孔3 1 \/32，C安装螺纹长度5 \/16\，底座2 1\/8的长度

Vented Long Elbow Brass Gages can be used on oil bearings, gear boxes, crank cases, transformers, switches or any application requiring visual indication of liquid level. The leak proof construction, large vent hole and unrestricted passages permit fast and accurate liquid level response.","The base of a Long Elbow Brass Gage is an additional 1\/2 longer than a Short Elbow Brass Gage, providing additional clearance from the mounting surface. The square shank with pipe thread screws horizontally into a tapped hole. The gage can be disassembled for installation in very tight places.","This brass elbow gage features a 1\/2 diameter glass sight protected by a shield. The shield can be revolved to the most convenient position for viewing or taken off completely for cleaning. A protected vent hole in the cap reduces the possibility of dust, dirt, or moisture getting inside the gage. The gage uses only atmospheric pressure. A Teflon washer reduces friction between the cap and the glass during installation and adjustments. Buna-N seals are used. The unit tolerates temperatures up to 225° F.","Long Elbow Brass Gages can also be custom built with optional parts including alternate caps and\/or drain bases of varying lengths and mounting threads. To view optional parts, click here.","Dimensions:","A Height from Center of Mounting Hole 3 15 \/16","B Sight Opening 3 1\/32","C Length of Mounting Thread 1\/2 \"","Length of Base 2 1\/8

通风长弯头黄铜量规可用于油轴承、齿轮箱、曲柄箱、变压器、开关或任何需要目视指示液位的应用。防漏结构、大通气孔和不受限制的通道允许快速准确的液位响应。，长弯头黄铜压力表的底座比短弯头黄铜压力表额外长1/2，提供与安装表面的额外间隙。带有管螺纹螺钉的方柄水平地拧入螺纹孔中。该量规可拆卸安装在非常紧密的地方。，这种黄铜弯头量规具有直径为1\/2的玻璃观察孔，由一个防护罩保护。护罩可以旋转到最方便查看的位置，也可以完全取下进行清洁。盖子上有一个受保护的通风孔，可以减少灰尘、灰尘或湿气进入压力计内部的可能性。压力表只使用大气压力。在安装和调整过程中，聚四氟乙烯垫圈可减少盖和玻璃之间的摩擦。使用丁腈橡胶密封件。该装置可承受高达225° F.，长弯头黄铜量规也可定制，带有可选部件，包括不同长度的替代盖和/或排水底座和安装螺纹。要查看可选部件，请单击此处。，尺寸：，A距安装孔中心的高度4 7 \/16，B观察孔3 17 \/32，C安装螺纹长度7 \/16\，底座2 1\/8的长度

通风长弯头黄铜量规可用于油轴承、齿轮箱、曲柄箱、变压器、开关或任何需要目视指示液位的应用。防漏结构、大通气孔和不受限制的通道允许快速准确的液位响应。，长弯头黄铜压力表的底座比短弯头黄铜压力表额外长1/2，提供与安装表面的额外间隙。带有管螺纹螺钉的方柄水平地拧入螺纹孔中。该量规可拆卸安装在非常紧密的地方。，这种黄铜弯头量规具有直径为1\/2的玻璃观察孔，由一个防护罩保护。护罩可以旋转到最方便查看的位置，也可以完全取下进行清洁。盖子上有一个受保护的通风孔，可以减少灰尘、灰尘或湿气进入压力计内部的可能性。压力表只使用大气压力。在安装和调整过程中，聚四氟乙烯垫圈可减少盖和玻璃之间的摩擦。使用丁腈橡胶密封件。该装置可承受高达225° F.，长弯头黄铜量规也可定制，带有可选部件，包括不同长度的替代盖和/或排水底座和安装螺纹。要查看可选部件，请单击此处。，尺寸：，A距安装孔中心的高度4 7 \/16，B观察孔3 17 \/32，C安装螺纹长度5 \/16\，底座2 1\/8的长度

通风长弯头黄铜液位计可用于油轴承、齿轮箱、曲柄箱、变压器、开关或任何需要目视指示液位的应用。防漏结构、大通气孔和不受限制的通道允许快速准确的液位响应。，长弯头黄铜压力表的底座比短弯头黄铜压力表额外长1/2，提供与安装表面的额外间隙。带有管螺纹螺钉的方柄水平地拧入螺纹孔中。该量规可拆卸安装在非常紧密的地方。，这种黄铜弯头量规具有直径为1\/2的玻璃观察孔，由一个防护罩保护。护罩可以旋转到最方便查看的位置，也可以完全取下进行清洁。盖子上有一个受保护的通风孔，可以减少灰尘、灰尘或湿气进入压力计内部的可能性。压力表只使用大气压力。在安装和调整过程中，聚四氟乙烯垫圈可减少盖和玻璃之间的摩擦。使用丁腈橡胶密封件。该装置可承受高达225° F.，长弯头黄铜量规也可定制，带有可选部件，包括不同长度的替代盖和/或排水底座和安装螺纹。要查看可选部件，请单击此处。，尺寸：，A距安装孔中心的高度4 7 \/16，B观察孔3 17 \/32，C安装螺纹长度1 \/2\，底座2 1\/8的长度

Vented Long Elbow Brass Liquid Level Gages can be used on oil bearings, gear boxes, crank cases, transformers, switches or any application requiring visual indication of liquid level. The leak proof construction, large vent hole and unrestricted passages permit fast and accurate liquid level response.","The base of a Long Elbow Brass Gage is an additional 1\/2 longer than a Short Elbow Brass Gage, providing additional clearance from the mounting surface. The square shank with pipe thread screws horizontally into a tapped hole. The gage can be disassembled for installation in very tight places.","This brass elbow gage features a 1\/2 diameter glass sight protected by a shield. The shield can be revolved to the most convenient position for viewing or taken off completely for cleaning. A protected vent hole in the cap reduces the possibility of dust, dirt, or moisture getting inside the gage. The gage uses only atmospheric pressure. A Teflon washer reduces friction between the cap and the glass during installation and adjustments. Buna-N seals are used. The unit tolerates temperatures up to 225° F.","Long Elbow Brass Gages can also be custom built with optional parts including alternate caps and\/or drain bases of varying lengths and mounting threads. To view optional parts, click here.","Dimensions:","A Height from Center of Mounting Hole 4 15 \/16","B Sight Opening 4 1\/32","C Length of Mounting Thread 7 \/16\"","Length of Base 2 1\/8

通风长弯头黄铜液位计可用于油轴承、齿轮箱、曲柄箱、变压器、开关或任何需要目视指示液位的应用。防漏结构、大通气孔和不受限制的通道允许快速准确的液位响应。，长弯头黄铜压力表的底座比短弯头黄铜压力表额外长1/2，提供与安装表面的额外间隙。带有管螺纹螺钉的方柄水平地拧入螺纹孔中。该量规可拆卸安装在非常紧密的地方。，这种黄铜弯头量规具有直径为1\/2的玻璃观察孔，由一个防护罩保护。护罩可以旋转到最方便查看的位置，也可以完全取下进行清洁。盖子上有一个受保护的通风孔，可以减少灰尘、灰尘或湿气进入压力计内部的可能性。压力表只使用大气压力。在安装和调整过程中，聚四氟乙烯垫圈可减少盖和玻璃之间的摩擦。使用丁腈橡胶密封件。该装置可承受高达225° F.，长弯头黄铜量规也可定制，带有可选部件，包括不同长度的替代盖和/或排水底座和安装螺纹。要查看可选部件，请单击此处。，尺寸：，A距安装孔4 15 \/16的高度，B观察孔4 1 \/32，C安装螺纹长度5 \/16\，底座2 1\/8的长度