EAW-Eastern Acoustic Works，Inc.，入门级接入真正专业的扬声器系统。12英寸。低音扬声器在最佳通风外壳1英寸。90°喇叭上的高频。把手和橡胶脚垫，螺纹安装点和标杆安装杯标准。与FR250z低音炮一起工作，，一个紧凑的通风梯形外壳中的2路无源全频系统。它包括一个12英寸低音扬声器和一个1英寸出口\/2英寸音圈压缩驱动器，安装在一个90° x 45°恒定指向性喇叭上。它配有把手和橡胶脚垫、一个杆安装杯和三个3\/8-16安装点。内部无源交叉网络使用复杂的非对称滤波器来分割信号并执行关键的均衡功能。
Bose Corp.","Panaray® LT 9403 loudspeaker is a 3-way, high SPL, full range speaker designed for indoor applications. It features dispersion control and focused coverage with a frequency response of 50Hz - 16kHz and a maximum SPL of 121dB (127db peak). The LT 9403 offers a 93 degree horizontal by 49 degree vertical dispersion which provides consistent on-and-off axis response. The waveguide can be rotated 90 degrees allowing for easier placement of the speaker. Each loudspeaker also includes a 15-inch woofer. Like Panaray LT mid\/high loudspeakers, these full-range models use an innovative Bose® V2 mid-frequency engine. The integrated V2 driver heat sink provides cooler operation and improved reliability. Multiple hang points allow for convenient cluster configuration using industry-standard suspension hardware. Other key features are: - High degree of pattern control allows designers and installers to effectively control dispersion for clearer, more intelligible sound. - Full-range sound with frequency response down to 50Hz helps reduce the need for a separate bass source. An excellent choice for installations that demand full-range sound but cannot accommodate separate bass components. - A waveguide that can be rotated 90 degrees allowing the loudspeakers to be flown vertically or horizontally while still maintaining the same coverage pattern.
Electro-Voice","The XLD281 is the core element for constructing X-Line Very Compact systems. The XLD281 is a three?way design using Coverage Control Technology (CCT™) to provide control horizontal coverage to 250Hz. The XLD281 uses an eight-inch, neodymium, low-frequency transducer, an eight-inch, neodymium, LF\/MB transducer, and two neodymium, two-inch, voice-coil compression drivers combining through two Hydra™ plane wave generators into a 120 degree x 10 degree waveguide. CCT™ uses both eight-inch transducers to provide maximum low-frequency output and operating bandwidth while controlling horizontal beamwidth to 250 Hz by using DSP. The XLD281 can be used in triamp mode, or in biamp using a sophisticated internal passive network. Designed for use in arrays of four or more elements, the XLD281 delivers full-bandwidth audio with precise, predictable coverage control. Integrated rigging with hinge points located correctly between array elements is easy to use and quickly provides uncompromised line array performance. Ground-stacking is easy using array rails or subwoofers as the array base.
