"AS-i master","The SBM includes an AS-i Master, which can be switched off as an option. This permits several SBMs to be operated on an AS-Interface circuit. Configuration is performed with a PC. LEDs signal the state on the device.","OSSDs (Output Signal Switching Devices) ","Safe inputs","There are four safe inputs to which safety devices without AS-i bus can be directly connected. The inputs can be optionally used as standard inputs\/ monitoring outputs, e.g. for feedback loop or start button.","Logic functions","Programmable with AsiMon software. All safety components can be programmed with different functions as inputs. The inputs can be linked with AND or OR gates or via logic functions such as FlipFlop, switch-on delay, turn-off delay or pulses. Different programs can be stored on memory cards.","AS-Interface monitor","The monitor controls one AS-i circuit with up to 31 safe slaves and up to 16 OSSDs, of which 2 are built into the device. 14 circuits can be used externally in addition."

"OSSDs (Output Signal Switching Devices)","Auxiliary contacts ","One auxiliary contact per channel.","Inputs","One start input per channel and one feedback loop per channel. Freely usable on SFM-B...","Logic functions ","Programmable with AsiMon software. All safety components can be programmed with different functions as inputs. The inputs can be linked with AND or OR gates.","With the monitors SFM-B..., additional logic func- tions such as FlipFlop, switch-on delay, turn-off delay or pulses are available. The number of links and the memory depth are larger than on the SFM-A... devices."

安全速度监测继电器超速和零速度检测和控制使用传统的接近传感器作为传感器。该装置适用于离心机、涡轮机、游乐设施等应用中的最大速度监视器，或在生产环境中验证点动速度或零速度的维护模式下，作为最大速度的监视器。监测机械和系统中的转速，特点，优点，技术

"EUCHNER Safety Switches are used to protect personnel by monitoring and interrupting the safety circuit depending on the position of the machine guard. The locking solenoid holds the guard closed until a stored energy hazard has dissipated. It can also prevent damage to a part in process due to an inadvertent machine shutdown. To meet current worldwide standards, safety interlock components cannot be easily bypassed. These switches have positive opening contacts (in accordance to NFPA 79) and redundancy to guarantee that they fail to a safe state. The TK switch utilizes the same body as the TP switch however has a metal actuating head and locking pin. This unique switch does not require a separate actuator just a separate hole on the door opposite of the actuating pin of the switch."